Phone: (434) 946-9125

Support Center

Using The Deviation Tool

Last Updated: Aug 14, 2015 03:52PM EST
This article provides step-by-step guide to using the deviation tool in Point2CAD.

Using the deviation tool in Point2CAD is a simple process. First, you will need to select the deviation tool from the Point2CAD menu.

Once this has been done select the surface that you want to measure on the physical part.

Then you can simply run the probe across the surface of the part and analyze the deviation in a live view.

If you press the green button while running the probe across the surface then the min and max values will be displayed in the red and blue boxes as shown below.
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found