Phone: (434) 946-9125

Support Center


  • Custom Reporting in Geomagic Control

    Geomagic Control (formerly known as Geomagic Qualify) has some great reporting features that can be customized...

    Jan 20, 2017 06:32PM EST
  • Design X Introductory Beginner Workflow

    When starting with Geomagic Design X, it is important to have an idea about what functions need to be executed...

    Feb 06, 2018 03:47PM EST
  • Design X Interface Guide

    There are many different ways to control what is shown on screen. Being familiar with the interface is necessa...

    Feb 06, 2018 03:49PM EST
  • Control X Deviation Reporting

    Many times users need to compare geometry of a scan to a reference part. These deviations can hold important ...

    Jun 18, 2018 04:59PM EST
  • Design X File Import Guide

    Many different CAD/mesh/point cloud file types can be imported into Design X. This command will bring the sel...

    Feb 06, 2018 03:50PM EST
  • Design X Livescan Guide

    LiveScan, which involves the scan data being read from the scanner into Geomagic Design X directly rather than...

    Feb 06, 2018 03:52PM EST
  • Design X Point Processing Guide

    Once the scan file has been acquired, the data can be processed and cleaned up. This includes aligning and co...

    Feb 06, 2018 03:53PM EST
  • Design X Regions Guide

    Note that only a mesh object can be segmented into regions. Regions are not needed for all workflows, although...

    Feb 06, 2018 03:55PM EST
  • Design X Reference Geometry Guide

    Reference Geometry can be used for alignments, constraints, mesh sketches, cross sections, splits, cuts and a ...

    Feb 06, 2018 03:55PM EST
  • Design X Align Guide

    There are two different methods of defining the alignment using the Interactive Alignment tool. 3-2-1 Alignmen...

    Feb 06, 2018 03:57PM EST
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found