Calibration
A rotary table can greatly speed up the 3D scanning process. In order for FlexScan3D to recognize the position of the table it needs to be calibrating befo...
Wed, 29 Aug, 2018 at 12:14 PM
Many people wonder what calibration board size they should use for a given scanning setup. Make sure your calibration board is 1/3 of the camera's liv...
Wed, 29 Aug, 2018 at 12:15 PM
Calibrating a HDI scanner can be a daunting task. With a few tips and tricks it gets a lot easier with much better results. A clean calibration can result...
Wed, 29 Aug, 2018 at 12:23 PM
We do not recommend changing the focus after your system has been calibrated. You may change the projector focus slightly after calibration but only to wher...
Thu, 16 Aug, 2018 at 12:20 PM