GoMeasure3D Support

Tutorials

Quick Start Guide for 3D Printing
This is a .pdf of a quick print guide to get you off the ground running and printing quickly.  Each step is boiled down very simply.  There are other article...
Thu, 16 Aug, 2018 at 3:01 PM
Hot End Nozzle Cleaning
If your Airwolf printer is no longer extruding correctly there is potential the head could be clogged.  This is indicated by uneven filament flow that conta...
Thu, 16 Aug, 2018 at 3:01 PM
How To Clear a Filament Jam from and Axiom Dual Direct Drive
Filament can get jammed inside of the 3D printer's hot end.  This can be due to pieces of dirt falling into the printing system.  Improper storage of f...
Thu, 16 Aug, 2018 at 3:02 PM
Proper Print Bed Adhesion
Airwolf 3D printers need proper technique to ensure the best bed adhesion.  Incorrect adhesion can result in the part separating from the bed.  This will ru...
Thu, 16 Aug, 2018 at 3:02 PM
Dual Head Leveling Tutorial
Dual printing can be very difficult if the 3D printer is not calibrated correctly.  If the printer heads are not at the correct height, they can drag throug...
Thu, 16 Aug, 2018 at 3:02 PM