GoMeasure3D Support

Geomagic Software Guides

Custom Reporting in Geomagic Control
Geomagic Control (formerly known as Geomagic Qualify) has some great reporting features that can be customized. The video below shows a good overview of how...
Tue, 21 Aug, 2018 at 3:50 PM
DesignX Introductory Beginner Workflow
When starting with Geomagic Design X, it is important to have an idea about what functions need to be executed to get out the desired product.  The beginner...
Tue, 21 Aug, 2018 at 3:51 PM
Design X Interface Guide
There are many different ways to control what is shown on screen. Being familiar with the interface is necessary to understand the other videos in this intr...
Tue, 21 Aug, 2018 at 3:51 PM
Control X Deviation Reporting
Many times users need to compare geometry of a scan to a reference part.  These deviations can hold important information like processing defects or extent ...
Tue, 21 Aug, 2018 at 3:54 PM
Design X File Import Guide
Many different CAD/mesh/point cloud file types can be imported into Design X.  This command will bring the selected data into what ever file is currently op...
Tue, 21 Aug, 2018 at 3:54 PM
Design X Livescan Guide
LiveScan, which involves the scan data being read from the scanner into Geomagic Design X directly rather than through an intermediary software application,...
Tue, 21 Aug, 2018 at 3:55 PM
Design X Point Processing Guide
Once the scan file has been acquired, the data can be processed and cleaned up.  This includes aligning and combining scans as well as triangulation. View ...
Tue, 21 Aug, 2018 at 3:55 PM
Design X Regions Guide
Note that only a mesh object can be segmented into regions. Regions are not needed for all workflows, although some tools like Solid Primitive will only acc...
Tue, 21 Aug, 2018 at 3:56 PM
Design X Reference Geometry Guide
Reference Geometry can be used for alignments, constraints, mesh sketches, cross sections, splits, cuts and a variety of other commands. It is usually easie...
Tue, 21 Aug, 2018 at 3:56 PM
Design X Align Guide
There are two different methods of defining the alignment using the Interactive Alignment tool. 3-2-1 Alignment allows for the least possible amount of data...
Tue, 21 Aug, 2018 at 3:56 PM