GoMeasure3D Support

Design X

DesignX Introductory Beginner Workflow
When starting with Geomagic Design X, it is important to have an idea about what functions need to be executed to get out the desired product.  The beginner...
Tue, 16 Jul, 2019 at 12:21 PM
Design X Interface Guide
There are many different ways to control what is shown on screen. Being familiar with the interface is necessary to understand the other videos in this intr...
Tue, 16 Jul, 2019 at 12:22 PM
Design X File Import Guide
Many different CAD/mesh/point cloud file types can be imported into Design X.  This command will bring the selected data into what ever file is currently op...
Tue, 16 Jul, 2019 at 12:24 PM
Design X Livescan Guide
LiveScan, which involves the scan data being read from the scanner into Geomagic Design X directly rather than through an intermediary software application,...
Tue, 16 Jul, 2019 at 12:21 PM
Design X Point Processing Guide
Once the scan file has been acquired, the data can be processed and cleaned up.  This includes aligning and combining scans as well as triangulation. Vi...
Tue, 16 Jul, 2019 at 12:25 PM
Design X Regions Guide
Note that only a mesh object can be segmented into regions. Regions are not needed for all workflows, although some tools like Solid Primitive will only acc...
Tue, 16 Jul, 2019 at 12:26 PM
Design X Reference Geometry Guide
Reference Geometry can be used for alignments, constraints, mesh sketches, cross sections, splits, cuts and a variety of other commands. It is usually easie...
Tue, 16 Jul, 2019 at 12:27 PM
Design X Align Guide
There are two different methods of defining the alignment using the Interactive Alignment tool. 3-2-1 Alignment allows for the least possible amount of data...
Tue, 16 Jul, 2019 at 12:27 PM
Design X Repair Mesh Guide
It is very important to clean up the mesh before surfacing the model.  Any holes or defects in the mesh will directly cause problems with the NURBS surface....
Tue, 16 Jul, 2019 at 12:28 PM
Design X CAD Modeling Guide
The two main approaches to creating a CAD object from scan data are parametric modeling and surfacing. Parametric modeling involves creating sketches and fe...
Tue, 16 Jul, 2019 at 12:29 PM