GoMeasure3D Support

Control X

Custom Reporting in Geomagic Control
Geomagic Control (formerly known as Geomagic Qualify) has some great reporting features that can be customized. The video below shows a good overview of how...
Tue, 21 Aug, 2018 at 3:50 PM
Control X Introductory Workflow
Control X is a premium inspection software.  This powerful tool can tell you lots of information about the properties of your part.  It can be a little tric...
Tue, 16 Jul, 2019 at 3:11 PM
Control X 2D Compare
When inspecting, sometimes it is important to only represent 2 dimensional information, like overall length of a part.  This is especially true if comparing...
Tue, 16 Jul, 2019 at 3:26 PM
Control X Alignment (Pre-Planned)
(Pre-Planned Workflow path) Alignment is one of the most important steps in this workflow.  It will directly affect the results of the upcoming analysis...
Tue, 16 Jul, 2019 at 3:27 PM
Control X Alignment (Unplanned)
(Unplanned Path) The alignment between the reference and measured data will have a significant impact on the results of the inspection. There are two ma...
Tue, 16 Jul, 2019 at 3:39 PM
Control X Annotations
How to add annotations to give contextual information about the inspection. Video: https://3dssupport.microsoftcrmportals.com/knowledgebase/article/KA-0...
Tue, 16 Jul, 2019 at 3:34 PM
Control X Compare (Pre-Planned)
(Pre-Planned path) 3D Compare is a great tool to get a simple visualization of the deviations between the reference and measured data.  If desired, it c...
Tue, 16 Jul, 2019 at 3:29 PM
Control X Compare (Unplanned)
(Unplanned Path) 3D Compare is a great tool to get a simple visualization of the deviations between the reference and measured data.  If desired, it can...
Tue, 16 Jul, 2019 at 3:38 PM
Control X Interface
There are many different ways to control what is shown on screen. Being familiar with the interface is necessary to understand the other videos in this intr...
Tue, 16 Jul, 2019 at 3:40 PM
Control X Datum and 3-2-1 Alignment
There are various types of alignment that allow users to have complete control on how the scans and parts align together to get the most accurate inspection...
Tue, 16 Jul, 2019 at 3:41 PM