GoMeasure3D Support

Control X

Control X Deviation Location
Deviations indicate there are differences between the model and the actual object.  Those locations can be marked and reported.  Video:  https://3dssupp...
Tue, 16 Jul, 2019 at 3:43 PM
Control X Enhanced Pairing Management
Geomagic has smart tools that can automatically section your scan in measurable regions.  This tools helps you define the information used in that process. ...
Tue, 16 Jul, 2019 at 3:48 PM
Control X GD&T (Pre-Planned)
(Pre-Planned Path) GD&T callouts can be added to the model based on the inspection plan.  Callouts and datums should be placed on the reference obje...
Tue, 16 Jul, 2019 at 3:49 PM
Control X GD&T (Unplanned)
(Unplanned Path) GD&T callouts can be added to the model based on the inspection plan.  Callouts and datums should be placed on the reference object...
Tue, 16 Jul, 2019 at 3:50 PM
Case Study Aligning a Mill
Case Study Investigating complicated alignment operations. Video: https://3dssupport.microsoftcrmportals.com/knowledgebase/article/KA-02698/en-us
Tue, 16 Jul, 2019 at 3:52 PM
Control X Import Measured Data (Pre-Planned)
(Pre-Planned Path) Play LiveInspect process will guide the operator through probing all the relevant features.  Some features like 2D Compare cannot be ...
Tue, 16 Jul, 2019 at 3:53 PM
Control X Import Measured Data (Unplanned)
(Unplanned Path) Measured data can be imported into CX using a variety of common file formats for point cloud or mesh data. Alternative, some scanners c...
Tue, 16 Jul, 2019 at 3:54 PM
Control X Import Reference Data
Reference data is not required for all workflows, but it will make analyzing the scan data much easier. Reference data takes the form of CAD, mesh, or const...
Tue, 16 Jul, 2019 at 3:55 PM
Control X Planned Inspection
Running an inspection file that was pre-defined can be quick and easy. Video:  https://3dssupport.microsoftcrmportals.com/knowledgebase/article/KA-01533...
Tue, 16 Jul, 2019 at 3:57 PM
Control X Probe and Scan to CAD
Systems that have a CMM can be connected to the inspection process. Video:  https://3dssupport.microsoftcrmportals.com/knowledgebase/article/KA-01279/en...
Tue, 16 Jul, 2019 at 3:58 PM